FAST DTF SUPPLIES Premium DTF Transfer Film Roll - 30" x 328FT (80cm x 100m)
FAST DTF SUPPLIES Premium DTF Transfer Film Roll - 30" x 328FT (80cm x 100m)
Pickup currently not available
30-Inch DTF Transfer Film – 328FT Hot & Cold Peel Roll
Produce large graphics and organized gang sheets with 30-inch Premium DTF Transfer Film from Fast DTF Supplies. Designed for compatible wide-format Direct-to-Film printers, this 328-foot roll offers hot and cold peel options, a matte finish, and an anti-slip backing for consistent garment transfer production.
Wide-Format DTF Film for Larger Designs and Gang Sheets
Make room for oversized apparel graphics or arrange multiple smaller designs across your printer's usable printing area. This 30-inch DTF film gives commercial print shops layout flexibility for custom T-shirts, hoodies, branded apparel, and other compatible garments.
- Hot and cold peel options: Choose the release method that suits your tested workflow and the film's application instructions.
- Wide printing medium: Accommodates larger artwork or multiple designs within your equipment's printable area.
- Consistent ink coverage: The coated printing surface supports CMYK graphics and white ink underbases with compatible inks and settings.
- Matte transfer finish: Produces a low-shine appearance for professional-looking apparel.
- Anti-static coating: Helps reduce static buildup during handling and printing.
- Anti-slip backing: Supports steady film feeding through compatible DTF roll printers.
- 328-foot roll: Provides approximately 100 meters of film for ongoing production.
30-Inch DTF Film Roll Specifications
- Roll width: 30 inches / 76.2 cm
- Roll length: 328 feet / approximately 100 meters
- Surface finish: Double-sided matte
- Printable surface: One designated coated side
- Backing: Anti-slip
- Peel type: Hot or cold peel
- Application: Direct-to-Film garment transfers
Check Compatibility With Your Production Equipment
Confirm that your printer accepts 30-inch-wide roll media before ordering. Check its roll core requirements, maximum roll diameter, and loading specifications, along with the supported film width of your powder shaker and curing equipment. Your usable printing width may be narrower than the full roll width.
How to Use This DTF Transfer Film
- Identify the designated printable side and load the roll according to your printer's instructions.
- Print your artwork using compatible DTF ink and the appropriate color and white ink settings.
- Apply DTF adhesive powder while the ink is wet, then remove excess powder from unprinted areas.
- Cure the adhesive according to the verified settings for your materials and equipment.
- Heat press the transfer onto a compatible garment using the recommended application settings.
- Peel hot or cold following the film's instructions and your tested process.
Test your ink, film, adhesive powder, and garment combination before full production to confirm print quality, release, adhesion, and wash performance.
Frequently Asked Questions About 30-Inch DTF Film
Is this film suitable for DTF gang sheets?
Yes. You can arrange multiple graphics across your printer's usable printing area to create gang sheets. Allow for the margins and spacing required by your equipment and transfer workflow.
Can this DTF film be peeled hot or cold?
Yes. This film supports both hot and cold peel applications. Follow the supplied application instructions and test your preferred peel method with your chosen materials.
Which side of the film should I print on?
Print on the designated coated printing side. Although both surfaces have a matte finish, only one side is printable. Refer to the roll labeling or supplier instructions to identify the correct side.
Will this film fit my wide-format DTF printer?
Your printer must support the roll's actual media width, core size, and diameter. Check the equipment specifications before purchasing, and confirm that your powdering and curing equipment can also handle the film width.
What heat press settings should I use?
Follow the verified temperature, time, pressure, and peeling instructions supplied for this film and your adhesive powder. Test the settings with your garment and heat press before beginning production.
How many transfers can I make from one roll?
The roll contains approximately 328 feet of film. Transfer yield depends on design dimensions, layout, spacing, printer margins, and production waste.
What other supplies do I need?
You will need a compatible DTF printer, DTF ink, adhesive powder, suitable curing equipment, and a heat press. Follow each product's instructions to establish consistent transfer results.
Shop Wide-Format DTF Film at Fast DTF Supplies
Prepare for your next apparel production run with 30-inch DTF transfer film from Fast DTF Supplies. Complete your workflow with Premium DTF Ink and DTF Adhesive Powder.